Fujitsu ETERNUS Multipath Driver V2 User Manual Download Page 20

Page: 20 / 140

Release Information

FUJITSU Storage ETERNUS Multipath Driver V2 User’s Guide for Linux

P2U3-0031-15ENZ0

Multipath Driver Updates

The following table shows the updates for each Multipath Driver version:

Fibre Channel connections are available for all the supported OSs.

(1/5)

The latest information is provided in the "FUJITSU Storage ETERNUS Multipath Driver V2 (for Linux)
Installation Information" found under "Downloads" at the following URL:

http://www.fujitsu.com/global/products/computing/storage/software/eternus-mpd/

Version

Modifications

V2.0L01
(May 2005)

The first version.

V2.0L02
(October 2005)

•

The following OSs are supported:

Red Hat Enterprise Linux AS (v.4 for x86) Update 1

Red Hat Enterprise Linux ES (v.4 for x86) Update 1

Red Hat Enterprise Linux AS (v.4 for EM64T) Update 1

Red Hat Enterprise Linux ES (v.4 for EM64T) Update 1

V2.0L03
(June 2006)

•

The following OSs are supported:

Red Hat Enterprise Linux AS (v.4 for x86) Update 2

Red Hat Enterprise Linux ES (v.4 for x86) Update 2

Red Hat Enterprise Linux AS (v.4 for EM64T) Update 2

Red Hat Enterprise Linux ES (v.4 for EM64T) Update 2

Red Hat Enterprise Linux AS (v.4 for Itanium) Update 2

Red Hat Enterprise Linux AS (v.4 for x86) Update 3

Red Hat Enterprise Linux ES (v.4 for x86) Update 3

Red Hat Enterprise Linux AS (v.4 for EM64T) Update 3

Red Hat Enterprise Linux ES (v.4 for EM64T) Update 3

SUSE Linux Enterprise Server 9 for x86 Service Pack 3

SUSE Linux Enterprise Server 9 for EM64T Service Pack 3

SUSE Linux Enterprise Server 9 for Itanium Processor Family Service Pack 3

•

The following storage systems are supported:

ETERNUS4000 models 80, 100, 300, and 500

ETERNUS8000 models 700, 900, 1100, and 2100

V2.0L10
(February 2007)

•

The following OSs are supported:

Red Hat Enterprise Linux AS (v.4 for x86) Update 4

Red Hat Enterprise Linux ES (v.4 for x86) Update 4

Red Hat Enterprise Linux AS (v.4 for EM64T) Update 4

Red Hat Enterprise Linux ES (v.4 for EM64T) Update 4

Red Hat Enterprise Linux AS (v.4 for Itanium) Update 4

SUSE Linux Enterprise Server 9 for x86 Service Pack 2

SUSE Linux Enterprise Server 9 for EM64T Service Pack 2

SUSE Linux Enterprise Server 9 for Itanium Processor Family Service Pack 2

Summary of Contents for ETERNUS Multipath Driver V2












































































































































Search results

Summary of Contents for ETERNUS Multipath Driver V2

Reviews:

Related manuals for ETERNUS Multipath Driver V2

Brands by name

Popular brands

Fujitsu ETERNUS Multipath Driver V2, User Manual

Search results

Summary of Contents for ETERNUS Multipath Driver V2

Reviews:

Related manuals for ETERNUS Multipath Driver V2

Brands by name

Popular brands