Chapter 11 Command Reference
11.2 "mpdconfig" Command
FUJITSU Storage ETERNUS Multipath Driver V2 User’s Guide for Linux
Copyright 2014 FUJITSU LIMITED
P2U3-0031-15ENZ0
122
-
-s option
If the specified recognition
order is correct, enter "y"
# /opt/FJSVmpd/bin/mpdconfig -s
Please wait for searching multipath information ...
LIST OF MULTIPATH DEVICE IN CURRENT DEVICE RECOGNITION ORDER
START
No PRODUCT SERIAL LUN_V
--------------------------------------------------------------------------------
0 ETERNUS_DXL 130011 0000
1 ETERNUS_DXL 130012 0000
--------------------------------------------------------------------------------
Please input m(Modify order), a(Accept order) or q(Quit) -->
m
Please input space-separated numbers in your request order.(ex. 2 1 0)
or input ’r’ to return to the previous menu. -->
1 0
LIST OF MULTIPATH DEVICE IN CURRENT DEVICE RECOGNITION ORDER
START
No PRODUCT SERIAL LUN_V
--------------------------------------------------------------------------------
0 ETERNUS_DXL 130012 0000
1 ETERNUS_DXL 130011 0000
--------------------------------------------------------------------------------
Please input m(Modify order), a(Accept order) or q(Quit) -->
a
START
No INITRD INCLUDING MPD PRODUCT SERIAL LUN_V
--------------------------------------------------------------------------------
0 initrd-2.6.18-8.el5-mpd.img :
1 initrd-2.6.18-8.el5-mpd2.img :
--------------------------------------------------------------------------------
This is a list of initrd images including ETERNUS multipath driver.
Please input a number or ’q’ for Quit. -->
0
INITRD IMAGE FILE : initrd-2.6.18-8.el5-mpd.img
--------------------------------------------------------------------------------
START
RECOGNITION ORDER: PRODUCT SERIAL LUN_V
--------------------------------------------------------------------------------
CURRENT: NOT FIXED
NEW : FIXED ETERNUS_DXL 130012 0000
ETERNUS_DXL 130011 0000
This program remakes the initrd image to apply the device recognition order.
Check the above configuration.
Is the configuration correct? y(yes), n(no) -->
y
making backup files (/etc/modprobe.conf, /boot/initrd-2.6.18-8.el5-mpd.img) ...
updating modprobe.conf.(/etc/modprobe.conf) ...
creating initrd ...
Remake of the initrd succeeded.
The new recognition order is enabled after reboot.
Enter the (blank-delimited)
numbers of the storage
systems, in the desired
order of recognition
Storage systems are displayed in the
order in which they are recognized
Parenthesized portion is only displayed if the
Multipath Driver is included in multiple initrd
Storage systems are
redisplayed using the new
recognition order
If the recognition order
is as desired, enter "a"
initrd images that include the
Multipath Driver are displayed
Select the initrd for which the
new recognition order is to be set
Enter "m" to change the current recognition order
