manualshive.com logo in svg

Fujitsu Eternus DX80 S2, User Manual

Share
Download
Fujitsu Eternus DX80 S2 User Manual Download Page 67

Chapter 5  Maintaining Optional Products
  5.1  Installing Drives

ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-

Copyright 2013 FUJITSU LIMITED

P3AM-4842-12ENZ0

67

■

About shock

5.1.4

Additional Drive Installation Procedure

This section describes how to install additional drives in the ETERNUS DX Disk storage system.

■

For 2.5" drives

Procedure

1

In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all 
components of the ETERNUS DX Disk storage system are in normal status.

2

Wear a wrist strap or touch a metal part to discharge the human body’s natural static 
electricity.

CAUTION

Do Not

•

Do not lay the drives directly on a desk or similar hard surface. Always use a 
rubber mat or other soft material to cushion the drives against physical 
shocks.

•

Do not stack drives or stand drives on end.

•

Do not apply external force to the interface connectors.

•

Do not knock or drop the drives on hard objects.

CAUTION

Do

•

If additional drives are installed in a way other as described here, damage 
and/or device failure or electrical shock may occur.

Do Not

•

Do not install drives that are for use in other devices.

Summary of Contents for Eternus DX80 S2



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands