Appendix B Audit Log List
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED
P3AM-4842-12ENZ0
164
02060004
Set FCoE Port Parameter
The FCoE port parameters are set.
$a
: Port number (example: 001, 002, or "All")
$b
: Host Affinity (Enable, Disable)
$c
: Transfer rate (10Gb)
$d
: Frame size [Byte] (512, 1024, 2048)
$e
: Host response name
$f
: Reset Scope (Initiator, Target)
$g
: Release Reservation if Chip is Reset
(Enable, Disable)
$h
: FCF VLAN ID (Enable, Disable)
$i
: FCF VLAN ID value (0 – 4095)
$j
: FCF fabric name setting (Enable, Disable)
$k
: FCF fabric name (example:
0001000100010001)
[Port=
$a
Affinity=
$b
Rate=
$c
Frame_Size=
$d
Host_Response=
$e
Reset_Scope=
$f
Reserve_Cancel=
$g
Vlan=
$h
Vlan_value=
$i
Fcf_Fabric=
$j
Fabric_Name=
$k
]
02060006
Set FC/FCoE Host
The FC host or the FCoE host settings are changed.
$a
: Host number
$b
: Host name
$c
: WWN
$d
: Host response name
$e
: Host group name
[No=
$a
Name=
$b
WWN=
$c
Host_Response=
$d
Host_Group=
$e
]
02060007
Delete FC/FCoE Host
The FC host or the FCoE host is deleted.
$a
: Host name
[Name=
$a
]
02060009
Set SAS Host
The SAS host settings are changed.
$a
: Host number
$b
: Host name
$c
: SAS address
$d
: Host response name
$e
: Host group name
[No=
$a
Name=
$b
Address=
$c
Host_Response=
$d
Host_Group=
$e
]
0206000A
Delete SAS Host
The SAS host is deleted.
$a
: Host name
[Name=
$a
]
0206000C
Set iSCSI Host
The iSCSI host settings are changed.
$a
: Host number
$b
: Host name
$c
: iSCSI name
$d
: Alias name
$e
: IP address type (IPv4, IPv6)
$f
: IP address (example: 192.168.1.10 or IPv6
notation)
$g
: CHAP user name
$h
: Host response name
$i
: CmdSN Count (20, 40, 80, 120, 180,
Unlimited)
$j
: Host group name
[No=
$a
Name=
$b
Iscsi_Name=
$c
Alias_Name=
$d
IP_Type=
$e
IP=
$f
Chap_User=
$g
Host_Response=
$h
Cmdsn=
$i
Host_Group=
$j
]
0206000D
Delete iSCSI Host
The iSCSI host is deleted.
$a
: Host name
[Name=
$a
]
0206000E
Create LUN Group
The affinity group or the LUN group is created or
copied.
$a
: Affinity group name or LUN group name
$b
: Affinity group number or LUN group
number
$c
: Host LUN
$d
: Volume number
[Name=
$a
No=
$b
[LUN=
$c
Volume=
$d
]]
Event code
Upper: Message
Description
Lower: Detailed information
