Fujitsu ETERNUS DX100 S3, Configuration Manual

Page: 175 / 188

●
Required Environment
ETERNUS SF Advanced Copy Manager (ACM Agent) and a gateway device (that connects the storage systems)
must be installed in each operation site and backup site. ETERNUS SF AdvancedCopy Manager (ACM Manag-
er) must be installed in either of the sites (one ACM Manager can manage the ACM Agents of both sites).
●
Configuration Procedure
• Settings for the ETERNUS DX Disk storage system
Register the following information with ETERNUS Web GUI.
-
Advanced Copy license registration
If an Advanced Copy Feature license has been purchased, register it.
- Host interface settings
Set the port mode of the host interface to RA or CA/RA.
-
Copy table size settings
Set a memory area to manage the REC progress.
- Copy path settings
Set the information of the copy paths between the storage systems to perform an REC. Confirm that the
storage systems can communicate with each other after setting of the copy paths is complete.
-
REC buffer settings
This setting is required when an REC is performed in the Consistency mode. The Consistency mode guar-
antees the order of data transfers to the connection destination storage system for all of the specified
REC sessions.
- REC disk buffer registration
Set the REC disk buffer when REC buffer capacity is to be expanded.
•
Settings for ETERNUS SF AdvancedCopy Manager
Register the following information in the operation management server (ETERNUS SF AdvancedCopy Man-
ager).
- Registration of the ETERNUS SF AdvancedCopy Manger license
Register a license key via the ETERNUS SF Web Console or ETERNUS SF CLI.
-
Business server registration
Register the server in which the ACM Agent is running as the business server in the operation manage-
ment server.
-
Registration of the device information in the server that is the management target
Register the device information in the server that is the management target to the operation manage-
ment server.
-
Settings for replication
Register the replication source volumes and the replication destination volumes.
For more details on the settings for ETERNUS SF AdvancedCopy Manager, refer to "ETERNUS SF AdvancedCopy
Manager Operation Guide".
Chapter 11 Solution Configuration
11.1 Continuous Business
175
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0