Fujitsu ETERNUS DX100 S3, Configuration Manual, Page: 179 / 188

■
Configuration Procedure
Perform the required settings for Eco-mode. These settings can be performed with either ETERNUS SF Storage
Cruiser or ETERNUS Web GUI.
To set the visualization of power consumption and temperature, use ETERNUS SF Storage Cruiser. ETERNUS SF
Storage Cruiser obtains power consumption of the ETERNUS DX Disk storage system for "power consumption"
and ambient temperature (intake air temperature for the fans) for "temperature".
●
Required Environment
ETERNUS SF Storage Cruiser is required to visualize (graphically display) the power consumption and temper-
ature.
●
Configuration Procedure
Eco-mode
Perform the following settings with the operation management server (ETERNUS SF Storage Cruiser) or ETER-
NUS Web GUI:
•
Eco-mode setup
Enable the Eco-mode for the ETERNUS DX Disk storage system.
•
Eco-mode schedule setup
Set the schedule to apply Eco-mode. Register the time period in which the disk motors turn on for backup
or other operations as well as the RAID group that contains the disks to turn on these motors.
Visualization of the power consumption and the temperature
Register the ETERNUS DX Disk storage systems that are the targets for performance management in the op-
eration management server (ETERNUS SF Storage Cruiser).
For more details on the settings for ETERNUS SF Storage Cruiser, refer to "ETERNUS SF Storage Cruiser Opera-
tion Guide".
Chapter 11 Solution Configuration
11.3 Green
179
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0