1
Attach the destination labels to the connectors of the cables between enclosures.
(1)
Before attaching the destination labels, check the connection destination of the cables between
enclosures.
•
The connector on which the "
n
" symbol is printed is connected to the DI (OUT) port on the con-
troller enclosure or the drive enclosure.
•
The connector on which the "
l
" symbol is printed is connected to the DI (IN) port on the drive
enclosure.
The following figures show the connection of the cable between enclosures connecting the con-
troller enclosure to drive enclosure 1 and connecting drive enclosure 1 to drive enclosure 2.
•
When only one controller is installed
Drive enclosure 2
Drive enclosure 1
Controller enclosure
Chapter 4 Connecting Cables
4.2 Drive Enclosure Connection
58
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
Summary of Contents for ETERNUS DX100 S3
Page 2: ...This page is intentionally left blank ...
Page 188: ......