Fujitsu D2912 Bios Manual Download Page 41

Page: 41 / 72

Advanced Menu – Advanced system configuration

AMT IDE-R

Indicates if the iAMT IDE Redirection feature is set (for remote booting
and remote software installation).

Disabled

IDE-R is activated.

Enabled

IDE-R is deactivated.

AMT SOL

Indicates if the iAMT Serial Over LAN feature is con

gured (for redirecting the

keyboard and text via the network connection).

Disabled

SOL is disabled.

Enabled

SOL is enabled.

On-Board GbE LAN

Indicates if the integrated Gigabit Ethernet (GbE) LAN controller is activated.

Disabled

Onboard GbE LAN is disabled.

Enabled

Onboard GbE LAN is enabled.

Host MAC Address

Indicates the MAC address of the integrated Gigabit Ethernet (GbE) LAN controller.

Disabled

If the ME

rmware status is set to disabled or platform manageability is not set

to AMT.

Error

If the MAC address is not valid.

MAC
Address

The LAN MAC address.

Dedicated MAC Address

Indicates the MAC address of the ME sub-system.

Disabled

If the ME

rmware status is set to disabled or platform manageability is not set

to AMT.

Error

If the MAC address is not valid.

MAC
Address

The AMT MAC address.

Fujitsu Technology Solutions

Summary of Contents for D2912









































































Search results

Summary of Contents for D2912

Reviews:

Related manuals for D2912

Brands by name

Popular brands

Fujitsu D2912, Bios Manual

Search results

Summary of Contents for D2912

Reviews:

Related manuals for D2912

Brands by name

Popular brands