Fujitsu D2912 Bios Manual Download Page 25

Page: 25 / 72

Advanced Menu – Advanced system configuration

Floppy Disk Controller

Switches the mainboard control of the

oppy disk drive on or off.

Enabled

The

oppy disk control is switched on - IRQ6 is occupied.

Disabled

The

oppy disk control is switched off - IRQ6 is free.

USB Host Controller

USBcontroller

Speci

es whether the USB controller is switched on or switched off (

Disabled

). If this

function is switched off, the USB controller will not be recognised by any operating
system. As a result, no USB devices can be operated.

Enabled

USB host controller is enabled.

Disabled

USB host controller is disabled.

USB Devices

nes the USB devices for which Legacy Support is available.

None

No USB Legacy Support.

Keyboard
And Mouse
Only

USB Legacy Support only enabled for keyboard and mouse.

All

USB Legacy Support enabled.

USB Ports

Con

gures USB ports according to device classes. Any disabled USB ports are

also not available under the operating system.

Disable Unused Ports

All unused USB ports are disabled.

Disable Storage And HUB

All ports with mass storage devices and HUBs will be disabled.

Keyboard And Mouse Only

Only ports with keyboard and mouse will be enabled.

Enable all

All USB ports are enabled.

USB BIOS Hot-Plug

nes if newly connected USB devices at BIOS level are recognised during operation.

Disabled

Newly connected USB devices at BIOS level are not recognised.

Enabled

Newly connected USB devices at BIOS level are recognised.

Fujitsu Technology Solutions

Summary of Contents for D2912









































































Search results

Summary of Contents for D2912

Reviews:

Related manuals for D2912

Brands by name

Popular brands

Fujitsu D2912, Bios Manual

Search results

Summary of Contents for D2912

Reviews:

Related manuals for D2912

Brands by name

Popular brands