Fujitsu D2912, Bios Manual

Page: 60 / 72

Security Menu - Security features
Current TPM State
Indicates the current state of the Trusted Platform Module (TPM).
Disabled and Activated
Disabled and Deactivated
Enabled and Activated
Enabled and Deactivated
TPM Physical Presence operations
This Setup page cannot be accessed via the normal
BIOS Setup
. It is displayed automatically
during the
BIOS POST
process if it necessary to make a change to the TPM con fi guration.
It can be initiated either by BIOS Setup or via an operating system with TPM support. The
Trusted Computing Group (TCG) security provisions stipulate that con
fi guration changes
must be con fi rmed again by the operator (Physical Presence operations).
Physical Presence Operations
Item Specific Help
TPM Configuration change was requested to
State:
Enabled and Activated
Note:
This action will switch on the TPM
Reject
Execute
Reject Physical
Presence operations and
exit
Possible settings:
Enable & Activate
Deactivate & Disable
Clear
Virus Warning
Viruswarning Bootsector Computerviruses
Checks the boot sectors of the hard disk drive to see if any changes have been made since
the previous system start-up. If the boot sectors have been changed and the reason for this
is unknown, a suitable computer virus detection program should be run.
Enabled
A warning will be displayed if the boot sector has been changed since the previous
system start-up (e.g. new operating system or virus attack). The warning will stay
on the screen until you acknowledge the changes with
Confirm
or deactivate the
function (
Disabled
).
Confirm
This entry con fi rms a required change to a boot sector (e.g. new operating system).
Disabled
The boot sectors are not checked.
56 Fujitsu Technology Solutions