Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual Download Page 97

Page: 97 / 141

Monitor

Application

Indoor unit

Display

item

Display item

•

Time

Displays the data acquisition time. (*1)

For summer time, (S) is displayed.

Operation

Displays the operating status/unit status.

Special operation

Displays special operation.

Mode

Displays the operating mode.

Set Temp

Displays the setting temperature.

For each sensor information, refer to the “par. (-13-3 VRF Sensor Mark List”.

*1 Time is displayed according to the time format at the regional setting in the

Control panel of Windows.

Note

List of icon for special operation

•

For each icon information, refer to the “List of icon for special operation” of “par. (-3 Sys-
tem List”.

Summary of Contents for AIRSTAGE UTY-ASGXZ1














































































































































Search results

Summary of Contents for AIRSTAGE UTY-ASGXZ1

Reviews:

Related manuals for AIRSTAGE UTY-ASGXZ1

Brands by name

Popular brands

Fujitsu AIRSTAGE UTY-ASGXZ1, Operating Manual

Search results

Summary of Contents for AIRSTAGE UTY-ASGXZ1

Reviews:

Related manuals for AIRSTAGE UTY-ASGXZ1

Brands by name

Popular brands