4.
Data acquisition application right click menu
60
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Exit
4-4
Exits the Service Tool. When exited, the unit data acquired up to that point can be saved as
an Export file, as required. Care is required because all the data which is not saved when
exiting is deleted.
The saved Export file can be referenced later in the offline mode. (See “par. 3-3-1 Import file
selection”.)
Date setting field
Specify the date range of the data you want to save.
Ref. No. setting field
When you want to save the data of all the refrigerant circuit address, select “All”.
When you want to save the data of a specific refrigerant circuit address, select “Ref”.
Ref. No. setting field
This field can be used only when “Ref” was selected.
Select the refrigerant circuit address to be saved.
Save Export file & Exit button
Creates an Expert file and exits the Service Tool.
When the [Save Export file_Exit] button is clicked,
the save file dialog screen is displayed. Set the
Export file save location and save name.
When the [Save] button of the save file dialog
screen is clicked, Export file creation under the
conditions set on the screen starts. After the end of
creation, the program exits from the Service Tool.
Summary of Contents for AIRSTAGE UTY-ASGXZ1
Page 2: ......
