4.
Data acquisition application right click menu
38
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Unit operation
Go to the unit location and start the unit operation with a remote controller. The units
started will be listed in the order they are started on this list and will be numbered in
that order.
For the indoor units already allocated a No., No. cannot be updated even by
executing this operation. When No. must be reallocated, execute it after clearing
the No.( )
Note
Selecting units
When units are recognized and numbered, double click on the unit. The name registra-
tion dialog box will appear.
Naming units
Enter the name for the unit and click “OK”.
Stop registration
Click “Stop” when finished with the registration.
When the operation was executed, always end registration by this operation.
If this operation was not performed, the indoor unit will not operate properly
thereafter. (Indoor unit fan will not operate.)
Note
End registration
Click “Close” to end manual setting registration.
Clear button
Clear the No. ( ) of an arbitrarily selected indoor unit. When indoor unit was cleared
by this operation, the indoor unit can be operated at .
Instead of registering names for each start operation, you may operate all the
units and name all the units at once after stopping registration.
Note
Summary of Contents for AIRSTAGE UTY-ASGXZ1
Page 2: ......
