Fujitsu Siemens Computers FUTRO C, Operating Manual

Page: 49 / 70

System expansions
A26361-K679-Z120-1-7619, edition 2 41
Installing and removing plastic drive covers
Removing plastic drive cover
When you install an accessible drive in an empty bay, you must first remove the plastic drive cover.
► Open the casing (see "Opening the casing").
► Lay the casing cover accessibly on a non-slide surface.
► Press the latches of the relevant plastic
drive covers lightly out forwards and pull
the covers forward out of the front cover.
!
Do not throw away the safety covers. If you remove the drive again later, you must reinstall
the covers (cooling, fire protection or EMC regulations to be complied with).
Installing plastic drive cover
Depending on the drive (e.g. DVD drive), you must reinstall the plastic drive cover.
a b c
a = Cover for optical drive
b = Cover for module bay
c = no drive
► Set the drive covers from the outside below
into the front cover and press the latches
lightly into the respective brackets.
► Close the casing (see "Closing the casing").