Fujitsu Siemens Computers FUTRO C, Operating Manual

Page: 43 / 70

System expansions
A26361-K679-Z120-1-7619, edition 2 35
Installing a slot cover
i
The locking slider also serves as the fixing bracket for the slot cover. You can only remove
the slot cover if the locking slider has been moved to the right (from rear view).
2
1
► Insert the slot cover in the notch of the
casing corner from the inside (1).
► Now slide the slot cover (2) into the casing
rear panel.
► Close the casing (see "Closing the casing").
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the
BIOS Setup
. If necessary, change the settings. Further information is provided in the
PCI board documentation.