DryLam
A Trademark of Martin Yale Industries
251 Wedcor Avenue, Wabash, IN 46992
Brian Jennett- Tech-Line & Service Advisor/Manager
Phone: (260-569-7231)
ALM3230 Customer Instruction Manual.docx
Page 6 of 68
MAIN FEATURES
The AL-MEISTER ALM3230 is a fully automatic hot laminator that will feed, laminate, cut and trim
around all four sides of paper. Once threaded and set up properly, place printed paper on the Feeder
Tray and press the [START] button for full automatic operation.
1. Laminating Size/Laminating Film:
Letter/Double Letter/Digital sized paper can be laminated automatically. The film is specially produced.
Glossy and matte types are available.
2. Finish with, or without margin:
With margin: The ALM3230 can be set to cut and trim leaving a margin of film outside the edges of the
paper. With a margin the paper is completely encapsulated to enhance durability and resistance to
liquids.
Without margin: The ALM3230 will also cut and trim laminated paper to the paper size (“flush cut”). The
surface of the paper is protected with the edges exposed.
3. Feeds 200 sheets automatically:
Automatic feeding of up to 200 sheets on the tray enables fully automatic operation.
4. Speedy Lamination:
Any manual preparatory tasks that were needed in traditional encapsulation are now unnecessary. It
takes only 4 minutes to laminate 10 sheets of letter size paper.
5. Eco Mode saves power consumption:
For more details, see ECO MODE (Power Saving Mode).
