FujiFilm UA107x8.4BESM-T35K, Operating Manual

Page: 34 / 94

- vi -
(5) Setting of Camera Mode
If the camera to be used with is not capable of serial communication with a lens, set the communication mode (camera
mode) of the lens to OFF.
Setting Method
First, remove the shroud.
The shroud can be removed by pulling it towards the front after loosening the two lens shroud attaching knobs on
both sides of the lens.
The switch S703 (on A-board) can be seen on the right-hand side (viewed from front of lens) of the lens by
removing the lens shroud.
Set this switch to
“
OFF.
”
Note. Before shipping at the factory, S703 is set to ON.
ON OFF
Ａ -BOARD
Ａ -BOARD
S703
MEMO