FujiFilm UA107x8.4BESM-T35K, Operating Manual

Page: 42 / 94

- 8 -
Note. Contact to our sales agent for the accessory model numbers mentioned.
7.1 FOCUSING OPERATION
Focus is controlled by means of a control unit linked with the lens.
For operating instruction of a control unit, refer to the operation manual of the control unit.
Control Unit for Servo Operation
・
Focus Position Demand Unit : EPD-4A-S13F
、
EPD-4A-S13G or equivalent
・
Shot Box : ESB- *
Control Unit for Manual Operation
・
Focus Grip : BFH- *
Note 1. To control the focus of this lens by servo operation, use the digital control unit.
Note 2. When using the control unit for manual operation, be sure the internal mechanism is not pressed hard
against the final control element. If the internal mechanism is subjected to a strong impact, this may
cause the adjustment to deviate or cause a malfunction.
7.2 ZOOMING OPERATION
Zoom is controlled by means of a control unit linked with the lens.
For operating instruction of a control unit, refer to the operation manual of the control unit.
Control Unit for Servo Operation
・
Zoom Rate Demand Unit : ERD- *
・
Shot Box : ESB- *
Control Unit for Manual Operation
・
Zoom Handle : BZH- *
Note 3. To control the focus of this lens by servo operation, use the digital control unit.
Note 4. When using the control unit for manual operation, be sure the internal mechanism is not pressed hard
against the final control element. If the internal mechanism is subjected to a strong impact, this may
cause the adjustment to deviate or cause a malfunction.
7.3 IRIS OPERATION
Iris is controlled by an iris control signal (auto iris or manual) derived from the camera.
Iris can also be controlled by means of an iris control unit (EIC-*) linked with the lens.
For operating instruction of an iris control unit, refer to the operation manual of the iris control unit.
７. OPERATING INSTRUCTION
WARNING
If the camera is declined by 45 degrees or more, there may be a case that the lens installed
on the camera falls.
If it is required to shoot an object with the camera in the posture stated above, before using
the camera, a proper measure should be taken on the lens to avoid falling.