FujiFilm UA107x8.4BESM-T35K, Operating Manual

Page: 41 / 94

- 7 -
F.f MANUAL ADJ. KNOB
■
Adjustment by F.f Manual Adjusting knob
The flange focal length adjustment mechanism incorporated in this lens is driven under servo control. However,
even in the case that the power is not supplied to the flange focus length adjustment mechanism for any reason, the
adjustment can be carried out using the F.f manual adjusting knob located inside the lens.
a. Remove the shroud.
The shroud can be removed by pulling it towards the front after loosening the two lens shroud attaching knobs on
both sides of the lens.
b. Turn off the switch SW501 on the F-amplifier.
c. At the wide end in the zoom range, focus on the object by means of the F.f manual adjusting knob.
d. At the tele end, focus on the object by means of a focus control unit.
e. Repeat steps 'c' and 'd' several times so that the F.f is adjusted completely.
Note. Unless the adjustment is performed using the F.f manual adjusting knob, set switch SW501 to "ON".
F-AMP
F-AMP
SW202
SW203
CN101 CN102
CN103 CN104 CN405 CN601 CN602
CN603
CN203
CN604
ON ON
CN605
CN606
RV154
CN607
RV162 RV674
RV148
RV140
RV679
RV138
RV156
RV673
SW501
RV681
CN505
CN302
CN201
ON (Normal)
OFF(Manual)