44
5. SPECIAL PRINTING FUNCTIONS AND USE OF MAINTENANCE MENU
5
9. If the frame is in the correct position, proceed to the printing
operation.
If the frame position is incorrect, refer to Subsection 5.2.2
“Fixed Feed Length Adjustment (0400)”.
5.2.2 Fixed Feed Length Adjustment
1. Click the [Setup and Maintenance]
→
[04 Carrier Adjustment/
Maintenance]
→
[0400 NC100AY Fixed Feeding Setup]
buttons.
2. Decrease the feed length in the box on the screen when it is
too large (the frame is shifted to the right-hand side).
Increase the feed length in the box on the screen when it is
too small (the frame is shifted to the left-hand side).
3. Click the [Regist.] button.
4. Check the feed length by repeating the steps given in
5.3
Special Printing Functions
5.3.1 Changing Finished Image
To change the finished image for a specific film, set up the
condition previously in Menu 0225 “Custom Setting Regist/
Delete” (see Subsection 4.3.6 and call it up on the “Process 1”
screen (see the “Operating Instructions” manual).
5.3.2 Changing IX240 Unexposed Frame Display
Condition
The unexposed frame display condition for the IX240 on the
monitor and index print can be selected in Menu 0300 “Image
Scanning Method”.
K
K
K
K
Printing Screen
Detect Level 1:
Unexposed frames are not displayed.
Detect Level 2:
All frames including unexposed frames are displayed.
Detect Level 3:
Unexposed frames between exposed frames are also displayed.
5.3
5.2.2
5.3.1
5.3.2
SP3000_instruct_E.book 44 ページ ２００７年１２月１１日 火曜日 午後１時６分
