43
5. SPECIAL PRINTING FUNCTIONS AND USE OF MAINTENANCE MENU
5
6. Click the [Auto Correct] button.
• The mask position is corrected automatically and the
vertical and horizontal correction values are displayed in
the “Position Adjust” boxes.
7. If necessary, adjust manually by clicking the “Position Adjust”
arrow buttons.
NOTE: The mask position is returned to the “0.0 mm”
position if the [Initialize] button is clicked.
8. Click the [Regist.] button.
9. Repeat Steps 3 through 8 for all masks to be used.
10. Click the [Close] button.
• Operation returns to the menu screen.
5.2
How to Print Underexposed Film
and Fixed Feeding Adjustment
Select “Fixed Feed” when printing an underexposed 135-film.
If the film feed length is incorrect, adjust it in Menu 0400.
5.2.1 Fixed Feed Selection and Feed Length
Check
1. Click the [Operational Environment Settings] button in the
status and setting check bar on the order information screen.
• The “Operational Environment Settings” dialog box
appears.
2. Click the [Film Drive] button.
• The “Film Feeding Method” dialog box appears.
3. Click the [Feed] (Fixed Feed) button.
4. Click the [All] button.
5. On the printing screen, insert a 36-exposure negative into the
auto film carrier NC100AY.
6. Press the [PASS], [Start/Enter] keys thirty-five times to feed
the negative to the final frame.
7. Make sure the final frame is in the printing frame correctly.
8. Cancel scanning and remove the negative.
[Operational Environment Settings] Button
5.2
5.2.1
SP3000_instruct_E.book 43 ページ ２００７年１２月１１日 火曜日 午後１時６分
