20
4. SETUP AND MAINTENANCE
4
4.2.3 Data Backup (0122)
The data backup FD should be kept in a fixed place near the
machine because it is used after recovering from trouble or when
upgrading the system software.
[Selection]
[Setup and Maintenance]
→
[01 System Operation Setup and
Check]
→
[0122 Data Backup]
[Procedure]
Make a backup of unit data stored in the hard disk of the main
control unit, when data is changed.
The backup floppy disks are used when reinstalling or upgrading
the system software.
1. Prepare a floppy disk for data backup when backing up film
scanner or printer processor data.
2. Move the cursor to the “Destination” box and select “Film
Scanner” or “Printer processor”.
3. Click the [OK] button.
• “Making the backup of the data” message appears.
4. Insert the floppy disk into the floppy drive of the main control
unit.
5. Click the [OK] button.
6. Upon completion of the backup, click the [Cancel] button.
• Operation returns to the menu screen.
7. Remove the floppy disk from the disk drive.
4.2.4 Equipment Name Set (0124)
[Selection]
[Setup and Maintenance]
→
[01 System Operation Setup and
Check]
→
[0124 Equipment Name Set]
[Procedure]
Set up the equipment names.
“Device Name”: Normally enter “FE-FRONTIER”.
“Order Identifier: Enter “a” when connecting the IC
3
. When
connecting the second machine to one IC
3
,
select “b” for it.
4.2.3
4.2.4
SP3000_instruct_E.book 20 ページ ２００７年１２月１１日 火曜日 午後１時６分
