27
4. SETUP AND MAINTENANCE
4
2) Click the “2. Key Step Width/BL-SL” tab.
• The “2. Key Step Width/BL-SL” panel appears.
3) Set up the key step width and balance/slope.
NOTE: Click the [Default] button to return the key step width
to the initial value.
<Key Step Width Setup>
C, M, Y
: Normally enter “8”.
Dc, Dm, Dy : Normally enter “15”.
<BL/SL Setup>
Normally enter “0”.
Change settings only when the whole slope condition is
offset.
4) Click the “3. Sharpness/Grain Control” tab.
• The “3. Sharpness/Grain Control” panel appears.
5) Select “Hyper-sharpness” for “Sharpness process”. Set up
“Sharpness”, “Grain Control Process”, “Sharpness Large-
size Setup” and “Minimizing Color Spreading”.
<Sharpness>
Sharpness Level: Low 3
Low 2
Low 1
Normal
High 1
High 2
High 3
Under Level:
–2
–1
0
(Sharpness can only be set individually for under level.)
<Grain Control Process>
<Sharpness Large-size Setup>
Sharpness can be set up individually for magnification
entered in the “Magnification” box or higher.
–2
–1
0
+1
+2
<Minimizing Color Spreading>
Select “Yes” to minimize red spreading in white areas
when printing black and white grids, stripes, etc.
6) Click the “4. Saturation” tab.
• The “4. Saturation” panel appears.
7) Set up the “Saturation”.
<Saturation>
Color vividness control is set up. Range is –9 to +9.
Normally enter “0”.
Grain Roughness
Higher
Invisible
Normal
↑
Lower
Visible
SP3000_instruct_E.book 27 ページ ２００７年１２月１１日 火曜日 午後１時６分
