Fuji Xerox DocuPrint P375 d User Manual Download Page 220

Page: 220 / 303

220

> Paper is Jammed in the Paper Tray

Paper is Jammed in the Paper Tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these
steps:

1. Pull the paper tray completely out of the machine.

2. Slowly pull out the jammed paper.

Pulling the jammed paper downward using both hands allows you to remove the paper more easily.

3. Fan the stack of paper to prevent further jams, and slide the paper guides to fit the paper size.

4. Make sure the paper is below the maximum paper mark (▼ ▼ ▼).

Summary of Contents for DocuPrint P375 d
















































































































































































































































































































Search results

Summary of Contents for DocuPrint P375 d

Reviews:

Related manuals for DocuPrint P375 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P375 d, User Manual

Search results

Summary of Contents for DocuPrint P375 d

Reviews:

Related manuals for DocuPrint P375 d

Brands by name

Popular brands