170
Troubleshooting
Jagged Characters
Banding
Problem
Action
The printed result has jagged
characters.
Enable
Bitmap Smoothing
in the print driver. The following procedure uses the PCL 6
driver as an example.
1
On the
Advanced
tab, set
Bitmap Smoothing
under
Image Options
to
On
.
If the problem persists, check whether or not the downloaded font you are using is
recommended.
If using a downloaded font, ensure that the font is recommended for the printer, operating
system, and the application being used.
If the problem persists, contact the Fuji Xerox local representative office or an authorized
dealer.
Problem
Action
The printed result has banding.
Replace the drum cartridge if you have a spare cartridge.
See also:
•
•
If the problem persists, contact the Fuji Xerox local representative office or an authorized
dealer.
Replace the fusing unit if you have a spare unit.
See also:
•
If the cause of the problem is not located, contact the Fuji Xerox local representative office
or an authorized dealer.
Replace the transfer unit and the retard roll.
See also:
•
If the cause of the problem is not located, contact the Fuji Xerox local representative office
or an authorized dealer.
Summary of Contents for DocuPrint P365 d
Page 1: ...DocuPrint P365 d DocuPrint P368 d User Guide ...
Page 4: ...4 Preface ...
Page 216: ...216 Contacting Fuji Xerox ...