manualshive.com logo in svg

Fuji Xerox DocuPrint P365 d, User Manual, Page: 135 / 217

Share
Download
Fuji Xerox DocuPrint P365 d User Manual Download Page 135

Using the Operator Panel Menus

135

Tray Priority

Purpose:

To set the priority order of the paper trays for automatic tray selection. If paper trays loaded with the same paper size and 
type exists, the paper tray is selected according to this priority order.

Values:

NOTE: 

•

Tray2

 and 

3rd Priority

 are available only when the optional 550 sheet feeder is installed.

•

The paper tray selected for 

1st Priority

 is not displayed in 

2nd Priority

, and the paper trays selected for 

1st Priority

 

and 

2nd Priority

 are not displayed in 

3rd Priority

.

1st Priority

Bypass Tray

*

Sets the bypass tray as the first priority.

Tray1

Sets the standard 250 sheet tray as the first 
priority.

Tray2

Sets the optional 550 sheet feeder as the first 
priority.

2nd Priority

Bypass Tray

Sets the bypass tray as the second priority.

Tray1

*

Sets the standard 250 sheet tray as the second 
priority.

Tray2

Sets the optional 550 sheet feeder as the second 
priority.

3rd Priority

Bypass Tray

Sets the bypass tray as the third priority.

Tray1

Sets the standard 250 sheet tray as the third 
priority.

Tray2

*

Sets the optional 550 sheet feeder as the third 
priority.

Summary of Contents for DocuPrint P365 d


























































































































































































































Reviews:

No comments