Fuji Xerox DocuPrint P365 d Page 50 User Manual Download

Page: 50 / 217

Printer Connection and Software Installation

Select

Subnet Mask

, and then press the

button.

The cursor is located at the first octet of the subnet mask.

Specify the value of the subnet mask using the

button.

Press the

button.

The cursor moves to the next octet.

Repeat steps

to set the subnet mask, and then press the

button.

Ensure that the message

Restart Printer to apply setting

appears, and then press the

(

Back

) button

twice.

Select

Gateway Address

, and then press the

button.

The cursor is located at the first octet of the gateway address.

Specify the value of the gateway address using the

button.

Press the

button.

The cursor moves to the next octet.

Repeat steps

to set the gateway address, and then press the

button.

Ensure that the message

Restart Printer to apply setting

appears, and then press the

(

Back

) button.

Turn off and turn on the printer.

IMPORTANT:

•

Note that the data in the memory are cleared when the printer is turned off.

See also:

•

"Operator Panel" on page 22



Verifying the IP Settings

You can confirm the settings by printing the system settings report or using the ping command.

The following procedure uses Windows

7 and Windows

10 as examples.

Print the Printer Settings page.

Look under the

IPv4

heading on the Printer Settings page to ensure that the IP address, subnet mask, and gateway

address are appropriate.

To verify if the printer is active on the network, run the ping command in your computer:

Click

Start



All Programs



Accessories



Run

(for Windows

7).

Right-click

Start



Run

(for Windows

10).

Enter

cmd

, and then click

A black window is displayed.

Enter

ping xx.xx.xx.xx

(where

xx.xx.xx.xx

is the IP address of your printer), and then press the

Enter

key.

Reply from the IP address denotes printer is active on the network.

See also:

•

"Printing and Checking the Printer Settings Page" on page 51

Summary of Contents for DocuPrint P365 d

























































































































































































































Search results

Summary of Contents for DocuPrint P365 d

Reviews:

Related manuals for DocuPrint P365 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P365 d, User Manual

Search results

Summary of Contents for DocuPrint P365 d

Reviews:

Related manuals for DocuPrint P365 d

Brands by name

Popular brands