Fuji Xerox DocuPrint P365 d Page 42 User Manual Download

Page: 42 / 217

Printer Management Software

Document Monitor (Windows

Only)

This is a tool to display and confirm the printer status as well as the print job specified from the computer connected to the
printer via network.

You can use the Document Monitor to carry out the following operations:

•

Displays (in the [Document Monitor] window) the status of print job specified for the registered printer.

•

Displays the error that occurred in the printer while executing the specified print job.

•

Pauses, restarts, and deletes the specified print job.

NOTE:

•

Document Monitor can be installed from the

Software/Product Manual

disc.

•

Document Monitor does not support IPv6 (Internet Protocol version 6).

Summary of Contents for DocuPrint P365 d

























































































































































































































Search results

Summary of Contents for DocuPrint P365 d

Reviews:

Related manuals for DocuPrint P365 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P365 d, User Manual

Search results

Summary of Contents for DocuPrint P365 d

Reviews:

Related manuals for DocuPrint P365 d

Brands by name

Popular brands