manualshive.com logo in svg

Fuji Xerox DocuPrint P365 d, User Manual, Page: 214 / 217

Share
Download
Fuji Xerox DocuPrint P365 d User Manual Download Page 214

214

Contacting Fuji Xerox

Technical Support

Fuji Xerox recommends the Customer first utilize support materials shipped with the product, product diagnostics, 
information contained on the Web, and email support. If unsuccessful, to obtain service under product warranty the 
Customer must notify Fuji Xerox Telephone Support or its authorized service representative of the defect before the 
expiration of the warranty period. Customer will provide appropriate assistance to Telephone Support personnel to resolve 
issues, such as restoration of the operating system, software program and drivers to their default configuration and 
settings, verification of functionality of Fuji Xerox supplied products, replacement of customer replaceable units, clearing 
paper misfeeds and cleaning the unit and other prescribed routine and preventative maintenance.

If the Customer’s product contains features that enable Fuji Xerox or its authorized service representative to diagnose and 
repair problems with the product remotely, Fuji Xerox may request that the Customer allow such remote access to the 
product.

Summary of Contents for DocuPrint P365 d


























































































































































































































Reviews:

No comments