Fuji Xerox DocumentCentre C240 Series, User Manual

Page: 47 / 275

2.4 NetWare
33
2
Setti
ng up
Netw
ork
The network system kit (e.g. HUB) may not match the automatic setting of the frame type. If the data
link indicator of the network system kit connected to this machine is not lighted, change the frame type
setting of this machine to match the frame type of the file server. Use CentreWare Internet Services to
do the setting and see “Chapter 5 Configuring From Computer (CentreWare Internet Services)”
(P. 105) for details.
2.4.3
Setting Procedure
The following procedure describes how to set up this machine by PServer mode
to the network environment using NetWare.
Procedure
1
Checking host device name and network address:
By referring to “6.6 Printing Reports/Lists” in “Part 1 Hardware” of the User Guide
(Copier), print out the System Settings List and check the host device name and
network address printed under the NetWare item.
2
Configuring this machine:
Set the NetWare port to Enabled on this machine beforehand.
The Network Print Environment User Guide (Network.pdf) in the PCL Driver/Network Utility
(Windows

) CD-ROM for details.
3
Configuring the computer:
Install the printer driver supported by this machine to the computer. The printer
driver varies according to the OS used.
For the host device, use a personal computer that can function as a NetWare host device.
The Network Print Environment User Guide (Network.pdf) in the PCL Driver/Network Utility
(Windows

) CD-ROM for details.