Fuji Xerox DocumentCentre C240 Series User Manual Download Page 215

Page: 215 / 275

3.5 Checking/Deleting Scanned Data in Mailbox

205

Scanning With

Mailbox

Check the document or select the document for deleting.

■

Checking document:

Check the document.

Selecting the

button will display the previous screen and the

button the next screen.

■

Deleting document:

Select the document to be deleted, followed by

Delete

Selecting the

button will display the previous screen and the

button the next screen. If the

Select All button is selected, all the documents in the mailbox can be selected. You can select either
just one or all documents.

A screen for confirmation will be displayed.

Check the contents on the screen, and then select

Yes

Selecting the No button will return to the screen of step

Select

Close

repeatedly until the Basic Scanning screen is displayed.

Mailbox 001- Document List

Pages

Stored Date

Doc. No.-Type

No.

Select All

No. of Docs : 10

Delete

1
2

3
4

00002 - Store For Polling
00004 - Scanned Docs.

00006 - Mailbox Docs.
03855 - Scanned Docs.

65535 - Store For Polling

2001/1/1
2002/10/10

2002/12/31
2000/7/7

2000/7/30

2:02 AM
10:10 AM

11:59 AM
4:45 PM

8:31 PM

100

100
555

100

Mailbox 001- Document List

Pages

Stored Date

Doc. No.-Type

No.

Select All

No.of Docs : 10

Delete

00002 - Store For Polling

00004 - Scanned Docs.

00006 - Mailbox Docs.

03855 - Scanned Docs.

65535 - Store For Polling

2001/1/1
2002/10/10

2002/12/31
2000/7/7

2000/7/30

2:02 AM
10:10 AM

11:59 AM
4:45 PM

8:31 PM

100

100
555

100

Mailbox 001-Show Document List

No. of Pages

Stored Date

Document No.-Type

No.

Select All

No.of Docs: 10

Delete

00002

Store For Polling

00004

Scanned Docs.

00006

Mailbox Docs.

03855

Scanned Docs.

65535

Store For Polling

2001/1/1
2010/10/10

2099/12/31
2000/7/7

2000/7/30

2:02 AM
10:10 AM

11:59 AM
4:45 PM

8:31 PM

100

100
555

100

The following document(s) will be deleted.

Mailbox : 001 HID

Doc. No.-Type : 00002-Store For Polling

Stored Date : 2001/1/1 2:02 AM

Are you sure?

Yes

Summary of Contents for DocumentCentre C240 Series




















































































































































































































































































Search results

Summary of Contents for DocumentCentre C240 Series

Reviews:

Brands by name

Popular brands

Fuji Xerox DocumentCentre C240 Series, User Manual

Search results

Summary of Contents for DocumentCentre C240 Series

Reviews:

Brands by name

Popular brands