Fuji Xerox DocuCentre S2011 Basic Operation Manual Download Page 53

Page: 53 / 56

Problem Solving

091-424

[Cause]

The drum cartridge life is over.

[Remedy] Replace the drum cartridge immediately. Contact your local Fuji Xerox

representative or sales representative.

091-430

[Cause]

The drum cartridge life is over.

[Remedy] Switch off the machine power, make sure that the display is blank, and then

switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.

091-440

[Cause]

The drum cartridge need to be replaced soon.

[Remedy] Prepare a new drum cartridge.

091-441

[Cause]

The drum cartridge need to be replaced soon.

[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox representative or sales

representative.

091-914
091-915
091-916

[Cause]

An error occurred with the drum cartridge.

[Remedy] Switch off the machine power, make sure that the display is blank, and then

switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.

091-921

[Cause]

An error occurred with the drum cartridge.

[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox representative or sales

representative.

092-660

[Cause]

A drum cartridge error occurred.

[Remedy] Switch off the machine power, make sure that the display is blank, and then

switch on the machine power.

092-661

[Cause]

Temperature SNR (in CRU) value is out of range.

[Remedy] Exchange the Sensor unit, and switch off the machine power, make sure that the

display is blank, and then switch on the machine power.

092-668

[Cause]

ATC SNR (in drum cartridge) value is out of range.

[Remedy] Switch off the machine power, make sure that the display is blank, and then

switch on the machine power.

092-910

[Cause]

An error occurred.

[Remedy] Switch off the machine power, make sure that the display is blank, and then

switch on the machine power.

093-312

[Cause]

An error occurred with the toner cartridge.

[Remedy] Switch off the machine power, make sure that the display is blank, and then

switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.

093-400

[Cause]

There is no more toner in the toner cartridge.

[Remedy] Replace the toner cartridge.

093-406

[Cause]

The toner cartridge needs to be replaced soon.

[Remedy] Prepare a new toner cartridge.

093-912

[Cause]

There is no more toner in the toner cartridge.

[Remedy] Replace the toner cartridge.

Error Code

Cause and Remedy

Summary of Contents for DocuCentre S2011
























































Search results

Summary of Contents for DocuCentre S2011

Reviews:

Related manuals for DocuCentre S2011

Brands by name

Popular brands

Fuji Xerox DocuCentre S2011, Basic Operation Manual

Search results

Summary of Contents for DocuCentre S2011

Reviews:

Related manuals for DocuCentre S2011

Brands by name

Popular brands