Fuji Xerox DocuCentre S2011 Basic Operation Manual Download Page 45 | Manualshive

Page: 45 / 56

background image

45

Problem Solving

The size and orientation of paper loaded in
Bypass tray do not match the settings
specified in the machine.

Confirm that the size and orientation of paper
loaded in the Bypass tray) match the settings
displayed in the paper size display area, and
reload paper adjusting with the paper guides.
When changing the setting of paper size and
orientation, cancel the job first by pressing
the <Stop> button.

When copying using the "Pages per Size"
feature, the zoom ratio required to fit the
specified number of pages on a sheet is
beyond the range of 25 - 400%.

Press the <Stop> button.
Change the zoom ratio to fit entirely in the
paper, place all documents, and then press
the <Start> button.

Papers jammed in the machine's left cover.

Open the machine's left cover, and remove
the jammed paper.

Important •

Make sure that the paper tray is
completely closed when loading
paper or clearing a paper jam.

Papers jammed in the machine's One Tray
Module cover.

Open the machine's One Tray Module cover,
and remove the jammed paper.

Papers jammed in Tray 1.

Remove the jammed paper.

Important •

Make sure that the paper tray is
completely closed when loading
paper or clearing a paper jam.

Papers jammed in Tray 2.

Remove the jammed paper.

Papers jammed in the Bypass tray.

Remove the jammed paper.

Machine's left cover is open.

Close the cover.

Machine's front cover is open.

Close the cover.

Machine's One Tray Module cover is open.

Close the cover.

The image will be cut off with the current
setting.

Place the document in landscape orientation,
and then press the <Start> button.
<Important>
When using the document feeder, reload all
documents in the document feeder without
opening the document cover.

Cooling inside the machine.

Automatically started. Do not open any cover
of the machine.

Out of toner.

Replace the toner cartridge.

The drum cartridge needs to be replaced.

Turn the power off, wait for 10 seconds after
the display is turned off, and then turn the
power on again.
If the display cannot be turned off, replace
the drum cartridge.

Error Code

Cause

Remedy

«
...
43
44
45
46
47
...
»

Summary of Contents for DocuCentre S2011

























































Reviews:

No comments

Related manuals for DocuCentre S2011

Brand: TDT Pages: 15

Brand: Xerox Pages: 341

RS/6000 44P Series 270

Brand: IBM Pages: 216

Brand: Olivetti Pages: 438

da Vinci 1.0 Pro

Brand: XYZ Printing Pages: 11

Brand: Canon Pages: 12

Brand: Xerox Pages: 205

Brand: Olivetti Pages: 33

Brand: Ricoh Pages: 156

proColor pro900DP

Brand: Oki Pages: 18

Tally Colour Laser T8006e

Brand: Tally Pages: 200

Brand: SANEI ELECTRIC Pages: 60

C5020N - FS Color LED Printer

Brand: Kyocera Pages: 410

8200DX - Phaser Color Solid Ink Printer

Brand: Xerox Pages: 2

VarioPrint 4110

Brand: Oce Pages: 216

Brand: Hitt Marking Devices Pages: 27

Brand: Citizen Pages: 44

Brand: Ricoh Pages: 173

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands