LM2A Wall Mounted Solution
Page
4
of
20
Fuji Electric Europe GmbH
0. Preface
Thank you for purchasing our FRENIC-Lift WLM2A Wall Mounted solution series.
FRENIC-Lift WLM2A is a package including an inverter designed to drive a three-phase induction motor (hereafter
called induction motor) and a three-phase permanent magnet synchronous motor (hereafter called synchronous
motor) for exclusively controlling elevating machinery.
Improper handling might result in incorrect operation, a short life, or even a failure of this product as well as the
motor.
To drive a synchronous motor, a PG interface card option involving a pulse encoder is needed. For details, refer to
the instruction manual of PG Interface Card.
This instruction manual is the original instructions and provides only minimum requisite information for wiring and
operation of the product. Read through this manual before use.
For details about the inverter, refer to the FRENIC-Lift LM2A series Reference Manual that contains the precautions,
detailed functions, specifications and configuration.
Related documentation
FRENIC-Lift LM2A series Reference Manual
FRENIC-Lift LM2A series Instruction Manual
TP-A1-LM2 Installation Manual
TP-E1U Installation Manual
FRENIC-Lift LM2A series Starting Guide
These materials are subject to change without notice. Be sure to obtain the latest editions for use.
Safety precautions
Read this manual thoroughly before proceeding with installation, connections (wiring), operation, or maintenance
and inspection. Ensure you have sound knowledge of the device and familiarize yourself with all safety information
and precautions before proceeding to operate the inverter.
Safety precautions are classified into the following two categories in this manual.
Failure to heed the information indicated by this symbol may lead to dangerous
conditions, possibly resulting in death or serious bodily injuries.
Failure to heed the information indicated by this symbol may lead to dangerous
conditions, possibly resulting in minor or light bodily injuries and/or substantial
property damage.
Failure to heed the information contained under the CAUTION title can also result in serious consequences. These
safety precautions are of utmost importance and must be observed at all times.
Application
•
FRENIC-Lift is equipment designed to drive induction motors and synchronous motors for exclusively
controlling elevating machinery. Do not use it for single-phase motors or for other purposes.
Fire or an accident could occur.
•
This product may not be used for a life-support system or other purposes directly related to the human
safety.
•
Although product is manufactured under strict quality control, install safety devices for applications where
serious accidents or property damages are foreseen in relation to the failure of it.
An accident could occur.
