Wind the belt onto the strap/bungee pulley until
the rower handle is in the forwardmost position.
Feed the bungee cord (on the opposite side of the
freewheel) back through the bungee pulleys and
attach it to the attachment point.
The recoil tension decreases over time as the bungee cord
stretches. To increase the recoil tension, simply push the
inner clip out of the bungee hook from behind, pull the
required amount of rope through the inner clip and reinsert
the inner clip into the bungee hook as shown here.
Tip: Before reattaching the inner clip/bungee hook, tie a knot under slight tension on the lower
bungee pulley. This will keep the rope under tension while you refit the bungee hook.
43
