FuehlerSysteme FS6002, Instructions For Use Manual

Page: 37 / 70

37 - 70 71130/11E/0318
9 List of commands
Command Description
Command AB <id>AB<para5> Measuring range analogue output of air pressure (Analogue Barometer).
Command AD <id>AD<para5> Delay of runtime measurement (Acquisition Delay).
Command AH <id>AH<para5>
Measuring range analogue output of relative humidity (Analogue
Humidity).
Command AL <id>AL<para5> Measuring range analogue output of brightness (Analogue Luminance).
Command AM <id>AM<para5> Setting of averaging method (Averaging Mode).
Command AO <id>AO<para5> Switch the analogue outputs on/off (Analogue On).
Command AP <id>AP<para5>
Measuring range analogue output of precipitation intensity (Analogue
Precipitation).
Command AQ <id>AQ<para5>
Measuring range analogue output of daily sum of precipitation (Analogue
Qty).
Command AR <id>AR<para5> Scale the analogue wind speed output (Analogue Range).
Command AS <id>AS<para5> Set the analogue outputs to preselected values (Analogue Static).
Command AT <id>AT<para5>
Measuring range analogue output of temperature (Analogue
Temperature).
Command AV <id>AV<para5> Averaging period (Average).
Command BO <id>BO<para5> Selection calculation mode for total brightness (Brightness Option).
Command BP <id>BP<para5> Select parity for the interfaces (Baud Parity).
Command BR <id>BR<para5> Select baud rate for the interfaces (Baud Rate).
Command BT <id>BT<para5> Activating termination of RS485
– bus (Bus Termination).
Command CI <id>CI<para5> Select command interpreter (Command Interpreter).
Command CS <id>CS<para5> Saving configuration (Configuration Save).
Command DM <id>DM<para5> Duplex mode (Duplex Mode).
Command
DO
<id>DO<para5> Selecting measured or calculated brightness direction as analogue value.
Command DT <id>DT<para5> Date and time stamp (Date and Timestamp).
Command EI <id>EI<para5> Analogue values in case of error (Error Inversion).
Command ET <id>ET<para5>
Time until a measuring value error sets the generic error bit (Error
Timeout).
Command GP <id>GP<para5> Query the GPS data and the position of the sun.
Command HC <id>HC<para5> Defines the lower threshold for heating operation (Heating Condition).
Command HH <id>HH<para5> Output Help (Help, identical to: <id>??<para5>).
Command HP <id>HP<para5> Lowest heating level in % (Heating Power).
Command HS <id>HS<para5> Selecting mode for setting the station height (Height Setting).
Command HT <id>HT<para5> Heating control ON/OFF/automatic (Heating).
Command ID <id>ID<para5> WEATHER STATION ID (IDentifier).
Command KY <id>KY<para5> Access key (Key).
Command MC <id>MC<para5> Magnetic compass correction optional.
Command MD <id>MD>>para5> Measuring interval for the wind measurement (Measurement Delay).
Command NC <id>NC<para5> Correction to north (North Correction).
Command
OL <id>OL<para5> Linking analogue measuring values with the outputs (Output Link).
Command OP <id>OP<para5> For extending the output telegrams by optional parameters.
Command OR <id>OR<para5> Telegram output interval (Output Rate).
Command OS <id>OS<para5> Scale wind speed output (Output Scale).
Command PE <id>PE<para5> Precipitation events lower precipitation threshold (Precipitation Events).
Command PH <id>PH<para5> Precipitation threshold single volume (Precipitation High).
Command PN <id>PN<para5> Precipitation events upper precipitation threshold (Precipitation Number).