16 - 70
71130/11E/0318
Socket outlet 212812, 19-pin, (Binder, Series 440), EMC
1. Strip over L = 33mm.
Do not remove sheath.
2. Slip on pressing screw and clamping device.
Remove sheath.
3. Strip wire strands and tin-coat.
4. Fan / comb out shielding. Thread shield wires
into crown all round.
5. Engage distance sleeve and clamping
device.
6. Slide assembled unit backwards over cable
(approx. 10mm).
7. Solder inserts in place.
8. Slide assembled unit forwards until it engages
in the contact insert.
9. Draw shield wires towards shielding ring and
shorten.
Too long: wires on packing ring
– no seal.
Too short: no contact with shaft ring.
10. Insert assembled unit in carrier sleeve.
