Operator’s Manual: ThermoJet
Chapter 10: THJ80 Command Set
© SP Industries, Inc.
200-31974-999 Rev. 009
67
SKn
Change soak time 1-9999
WLn
Change window limit n = 0.5 – 10.0
CYn
Change program cycles
RRn
Manual mode ramp rate n=0-999
RP
Begin Program run
TCn
Nozzle or DUT n = 0,1
DAn
Air Purge On / off n = 0,1
RMn
Run Manual n=1,2,3
AU
Arm Up command
AD
Arm Down
ID
Return to Idle mode
HL
Halt program run
CN
Continue program run
DF
Begin defrost operation
OFF
Request to enter shutdown mode.
SL
Changes touchscreen to indicate system is under remote control
SU
Changes touchscreen back to manual mode screen
?RS0
- Returns a semi-colon delimited string
STsoaktime;TAvalue;TDvalue;AFvalue,ME (0-10); SP1value;SP2value;SP3value;MS(1-3)
?RS1
- Returns a semi-colon delimited string
PI(0-1);CYvalue;HL(0-1);SI(0-8)
?RS 2
- Returns a semi-colon delimited string
TC(0-1);HP(0-1);HK(0-1);DA(0-1);WLvalue;SKsoaktime setpoint;RRvalue
Note – need to install a decimal point for WL,SK,RR.
ThermoJet GPIB Command Set
Command
Description
*IDN?
Product ID
*STB?
Read Status Byte
*SRE(?)
Read/Write Service Request Enable
*TST?
Read Self Test Result
*ESR?
Read Event Status Register
*ESE(?)
Read/Write Even Status Enable
*RST
Reset Device
*CLS
Clear Status
*OPC(?)
Operation Complete
