Operator’s Manual: ThermoJet
Chapter 5: Display Screens
© SP Industries, Inc.
200-31974-999 Rev. 009
26
The “Status Window,” located at the top right of the screen, displays the current system status.
This window will also be present on most other screens and display one of the following
messages:
•
Idle –
Controlling at 25
°
C and 5 SCFM airflow.
•
Transitioning –
Transitioning to temperature setpoint.
•
Soaking –
Setpoint achieved (within dead band); system counting out the (previously set)
soak time. If no soak time has been set, status will go directly to “At Temperature”.
•
At Temperature –
Setpoint achieved and (previously set) soak time expired.
•
Defrost –
System undergoing defrost sequence.
•
Auto-Tuning –
System undergoing DUT auto-tuning sequence.
•
Initializing –
During first 35 seconds of system start up.
•
Holding –
Hold during a program execution.
Figure 10 – Air Flow Screen
The Air Flow button on the Manual mode, Program, and Auto-Tune screen displays the Air Flow
screen. This screen allows the user to change the airflow speed (SCFM or L/Min) to bring the
device to temperature quicker. If operator is in IDLE mode, the system keeps the default of 5
SCFM; however, once operating in Manual, Program, or Auto-Tune mode the system will select
the air flow selected on the Air Flow screen.
Air Flow Screen
Select SCFM or L/Min the
button changes from red
to green
