FSR AirShare DV-AS-21, User Manual, Page: 69 / 72

69 / 72
Mobile devices doesn’t connect
to the Hotspot of AirShare Connect the mobile
devices’ WIFI to the
AirShare again
Be sure of entering the
correct password
Doesn’t connect AirShare to the
same LAN as the mobile
devices Be sure the AirShare is
connected in the same LAN
as “WirelessMedia Lite for
Android” or “WirelessMedia
Lite for IOS”
Doesn’t connect to the correct
AirShare On Android or IOS devices
application, click the
DEVICE LIST, and click the
searched devices, such like
“AirShare-***”
The image quality on the main
display screen is not good. The quality or length of the
cable between the Base Unit
and the display or the
connection between these two. Replace the cable
Use another cable.
Check the cable to be
fasten properly.
Improper resolution for the
main screen.
AirShare can output
1920X1200_60Hz
1920x1080_60Hz. Change the resolution on
the Setting configuration.
And match it to the native
resolution of the main
screen. See “
Setting ” page.
Bad wireless connection. The
connection between the
transmitter launcher (PC client
software) to the base unit is not
stable, always fall away. Wireless congestion Use a Wi-FI scanner to find
a free wireless frequency
and channel and select it
via the setting configuration.
Low signal strength Put the base unit closer to
the main screen.
Change the orientation of
the antennas at the real
panel of AirShare to the PC
direction.
Remove or limit as much as
possible all obstructions
between the PC and base
unit.
Can’t get the WirelessMedia
Lite app to run when inserted
into laptop Bad connection at USB port on
the laptop Reconnect to the USB port
Try another USB port
Reboot the laptop