
53
/
72
10. The upgrading progress will be displayed on the progress bar as shown below, and the unit will
reboot automatically after complete the updating 100%.
11. If your FW is older than 3.1.3.F1005, perform the FW upgrade twice. The first time upgrading may
appear failed. Actually, it upgrades a half only. Power the unit off and on again by plug-out/in the
power cord, then upgrade a second time. The second time upgrading probably takes 1-2 minutes
while showing a black background. Wait until it shows “100%”. When completed the unit will
reboot automatically.
12. At that point, the unit will display the home page as shown below.
13. Use a pin to push the “Reset” button on the real panel of AirShare to restore to factory default.