FSR AirShare DV-AS-21, User Manual, Page: 18 / 72

18 / 72
6 Installation
Overview

Mounting methods for the Base unit

Table mounting

Wall mounting

Recommendations about antenna placement and orientation

AirShare Power Connection

AirShare Video Connection

AirShare Audio connection

AirShare LAN connection

About USB device connection

Wiring Diagram
6.1 Mounting methods for the Base unit
The Base unit can be installed in different ways in a meeting room.
Actual mounting hardware depends on the specific mounting surface and are not provided.

Table mount (simply place on the table surface or secure with included mounting brackets)

Wall mount (Secure to wall using included mounting brackets)
Attention: For optimal performance, install the Base unit close to the display and avoid obstacles
between the Base unit and PC/Laptop.
How to mount the AirShare Base Unit:
Note:
Mounting screws and anchors are not included in the AirShare box. The type of screws
depend on the mounting surface (stone, wood, plasterboard ...) you are mounting the Base Unit
to. Make sure the head of the screw is not larger than the keyhole in the bracket.
1. Drill two holes in the wall as indicated on the drawing.
Horizontal distance: 177 mm ± 0.15
2. Attach the two offset brackets with the four Phillips flathead screws to the tapped holes at the
bottom of the AirShare Base. The brackets should be installed properly to create an offset between
the base unit and the wall.