Fruehauf ArgoMax, User Manual - Maintenance Logbook

Page: 55 / 64

55
REGULAR MAINTENANCE AND CHECKS
- PAINTED OR GALVANISED ELEMENTS
⇒ Regularly remove all external pollution,
⇒ use detergents with a pH of between 6 and 10,
⇒ automatic cleaners: check the detergent solutions used (ph),
⇒ high pressure cleaners: check that the temperature is below 50°C, the pressure below 60 bars, use the lance at a
distance of over 60cm,
⇒ systematically rinse using cold, clean water, no detergent should dry on the coating.
To avoid the appearance or spread of corrosion patches, any element damaged by an impact or
a scrape must be repaired as soon as possible.
• With no centralised lubrication: follow the instructions in the Tridec manual
• Manual centralised lubrication:
⇒ frequency : activate the pump 20 times every 40 hours of use
⇒ grease reserve refill threshold : the grease level must be within the limits shown on the container.
When refilling, make sure to use the type of grease recommended on the label fixed to the container.
⇒ clogged greaser warning : if the pump will not activate, one of the 12 greasers is blocked
• Automatic centralised lubrication:
⇒ frequency : lubrication is automatic,
⇒ grease reserve refill threshold : the grease level must be within the
limits shown on the container. When refilling, make sure to use the
type of grease recommended on the label fixed to the container.
⇒ clogged greaser warning : if grease comes out of the pressure
safety valve, one of the 12 greasers is blocked
⇒ timer setting :
- lubrication time: 1 minute,
- pause time: 2h30
REGULAR MAINTENANCE AND CHECKS
- CITY SUPPLEMENT