Fruehauf ArgoMax, User Manual - Maintenance Logbook

Page: 23 / 64

23
MOVING THE SIDE UPRIGHTS:
• Releasing:
⇒ lift the upper latch,
⇒ pull the handle towards yourself
⇒ release the edge side upright,
⇒ reposition the handle.
• Movement:
⇒ move the uprights by hand, level and smoothly
• Locking:
⇒ follow the release steps in reverse order,
⇒ use the handle as a lever (less efforts due to its positioning),
⇒ check that it is level before locking
CURTAINS >
USE
If the vehicle is loaded, check that the freight is not pushing
against the upright.
Never release an upright if it is supporting height extensions.
SLIDING ROOF:
• Opening:
⇒ open the doors,
⇒ place the handling bar in the middle of the roof cross beam,
⇒
for vehicles that can be height adjusted, release the cross beam,
⇒ raise the cross beam using the handling bar and push towards the front,
⇒ grab the loop located on the side of the rear cross beam using the handling
bar and pull towards the front of the vehicle,
⇒ lock the handling bar using one of the curtain loops to keep the roof open.
• Closure:
⇒ pull the roof from the front towards the back using the handling bar until the
cross beam tips into its housing,
⇒ close the back doors.
If there is resistance, make sure the load is not pushing on the
tarpaulins. If necessary, re-position the goods.