Fruehauf ArgoMax User Manual - Maintenance Logbook Download | Manualshive

Page: 17 / 64

background image

17

3-POINT SPARE WHEEL SUPPORT

• USE:

⇒

the length of the tyre fixing screw and clamp correspond to the original vehicle tyre fitting.

⇒

in the case of a vehicle fitted with a 2

nd

support, it is delivered with a 320 mm rod making it possible to house tractor

tyres (315/60R22.5(175) - 315/70R22.5 (175) - 315/80R22.5 (175) - 295/60R22.5 (165))

• Fitting a wheel to the support:

⇒

position the wheel. For an outset wheel, the outset wall should be positioned at the top,

⇒

engage the screw making sure the screw head is behind the holding

stop,

⇒

engage the clamp onto the screw and position it in the 2 wheel trim

holes,

⇒

screw the nut manually as far as it will go,

⇒

Lock the screw chain into one of the nut holes so that the chain is fully

taut to prevent the nut from rotating.

COMMON EQUIPMENT AND OPTIONS >

SPARE WHEEL SUPPORT

Name

Len 326 / 22.5

Len 366 / 22.5

Len 366 / 19.5

Steel wheels

385/65R22,5 (120) - 385/55R22,5 (120)

11R22,5 (148) - 275/80R22,5 (148)

275/70R22,5 (148) - 295/80R22,5 (158)

455/45R22,5 (120)

445/45R19,5 (120)
435/50R19,5 (120)

Aluminium

wheels

11R22,5 (148) - 275/80R22,5 (148)

275/70R22,5 (148) - 295/80R22,5 (158)

385/65R22,5 (120)
385/55R22,5 (120)
455/45R22,5 (120)

Never use an alternating current source when testing electric circuits.
Never carry out welding operations on the vehicle with the circuit connected to the chassis bodywork.

All alterations to the electric equipment can put the proper operation of the original equipment in jeopardy. As a result, all altera-

tions made to the electric equipment automatically void the warranty.

Unless otherwise requested, the voltage used is 24 volts

LIGHTING

The vehicle electric equipment is compliant with the highway code. The sockets and connections are compliant with standards

applicable on the delivery date.
All connections or disconnections of sockets must be carried out with the tractor ignition cut to avoid damage to the electric

systems.

COMMON EQUIPMENT AND OPTIONS >

ELECTRICITY, LIGHTING AND SIGNAGE

«
...
15
16
17
18
19
...
»

Summary of Contents for ArgoMax

































































Reviews:

No comments

Related manuals for ArgoMax

Cyclone IV Trekking

Brand: Radical Design Pages: 2

Brand: HYOSUNG Pages: 133

Brand: Arctic Cat Pages: 84

Brand: Tomberlin Pages: 32

Brand: Tao Motor Pages: 73

Brand: Traxxas Pages: 26

Brand: BERG Pages: 12

DIRT QUAD SPORT

Brand: Razor Pages: 36

Brand: MANCO Pages: 20

Brand: FORS MW Pages: 13

Brand: FIORENTINI Pages: 21

Brand: Bailey Pages: 102

Brand: UTVs Factory Pages: 45

Brand: Johnston Pages: 58

Brand: Honda Pages: 234

Brand: Fox Pages: 13

Brand: Clark Pages: 100

Extra Sport Theme

Brand: BERG Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands