Fruehauf ArgoMax, User Manual - Maintenance Logbook

Page: 56 / 64

56
REGULAR MAINTENANCE AND CHECKS
- HITCH SHAFT
This part’s major safety role imposes its very careful manufacture: use of special steel, heat treatments, severe checks.
When the maximum wear diameter is reached anywhere on the shaft, replace the shaft with a shaft of identical
brand and model.
Every time the shaft is removed or replaced, replace all the screws using strictly identical brand and model
screws:
⇒ respecting the tightening order
⇒ the tightening torque: 190 Nm
Tighten the nuts diagonally, following the
⇒ tightening order
⇒ the nut tightening torque recommended by the equipment manufacturer
REGULAR MAINTENANCE AND CHECKS -
AXLES
Nominal
Ø
73
Min.
Ø 71
Nominal
Ø
114
Min.
Ø 112
MAX. 84 MAX. 74 MIN. 72 MAX. 82.5
Nominal
Ø
50.8
Min.
Ø 749