Fruehauf ArgoMax, User Manual - Maintenance Logbook

Page: 41 / 64

41
The extension of the subframe or undercarriage must be compliant with the instruction
plates fixed to the chassis:
⇒ apply the semi-trailer parking brake
⇒ release the subframe using the pneumatic control
CONTAINER CHASSIS >
SLIDING OF SUBFRAMES / RUNNING GEAR
• BEFORE LOADING:
⇒ make sure that the sliding chassis is adjusted to the container model to be
transported (see instruction plate on the chassis)
• INTERMEDIATE POSITION LOCK (ONLY MULTIFLEX)
• SLIDING OF THE CHASSIS IN SHORTEST AND LONGEST POSITIONS
CONTAINER CHASSIS >
LOADING/UNLOADING
⇒ make sure that all the foldaway or swivelling locks on the chassis are in the
position for the container model to be transported.
• LOADING:
⇒ make sure the container is locked onto the chassis at the four corner parts
⇒ make sure the twist-lock loosening prevention system is in position.
⇒ comply with the container position on the chassis in order not to exceed the
maximum authorised loads on the running gear and the tractor drive axle.
• UNLOADING:
⇒ before removing the containers, make sure all the twist-locks have been
released.
⇒ slide very slowly the chassis forward or backwards with the trucks until the
required tock position.
⇒
re-lock the subframe,
⇒ apply the semi-trailer parking brake
⇒ release the subframe using the pneumatic control
⇒ activate automatic indexing
⇒ slide very slowly the chassis forward or backwards with the trucks until the
indexing pin stops the translation chassis
⇒ remove the parking brake to release the indexing and relock the chassis
⇒ release the semi-trailer parking brake