Fronius Symo GEN24 10.0, Operating Instructions Manual, Page: 103 / 120

once, it must be completed successfully. The autotest cannot be started during emer-
gency power mode.
VAC inner
limit max Test to check the maximum voltage in the phases
VAC inner
limit min Test to check the minimum voltage in the phases
FAC inner
limit max Test to check the maximum frequency
FAC inner
limit min Test to check the minimum frequency
FAC altern-
ativ inner
limit max Test to check the maximum alternative frequency
FAC altern-
ativ inner
limit min Test to check the minimum alternative frequency
VAC outer
limit min Test to check the minimum voltage in the phases
VAC long
time limit Test to check the 10 min average voltage in the phases
Save as PDF
1
Click the 'Save as PDF' button.
2
Enter the file name in the input field and click on the 'Print' button.
The PDF is created and displayed.
Note on autotest
The limit values are set in the menu area 'Grid Code'.
The access code for the 'Grid Code' menu area corresponds to the installer code (PROFI
menu) and is only made available to Fronius following a written request. An appropriate
application form is available from national technical support.
103
EN