Data backup
The user is responsible for backing up any changes made to the factory settings.
The manufacturer accepts no liability for any deleted personal settings.
Maintenance
Check the mains plug, mains cable, charging lead, and charging terminals for
damage before each commissioning.
If dirt accumulates on the device, clean the surface of the device housing with a
soft cloth and only with solvent-free cleaning agents.
Repair
Repair work must only be carried out by authorized personnel. Use only original
spare and wearing parts (also applies to standard parts). It is impossible to guar-
antee that third-party parts are designed and manufactured to meet the de-
mands made on them, or that they satisfy safety requirements.
Do not carry out any alterations, installations, or modifications to the device
without first obtaining the manufacturer’s permission.
Obligations of
the operating
company
The operating company must only allow persons to work with the device if they
-
are familiar with the basic occupational safety and accident prevention regu-
lations and are trained in handling the device
-
have read and understood these Operating Instructions, especially the
"Safety rules" section, and have confirmed this with their signature
-
are trained according to the requirements for the work results.
The safety-conscious work of the personnel must be checked regularly.
Safety Inspec-
tion
The manufacturer recommends that a safety inspection of the device be per-
formed at least every 12 months.
A safety inspection by a certified electrician is recommended
-
after changes,
-
after alterations,
-
after repair, service and maintenance,
-
at least every 12 months.
For the safety inspection, follow the appropriate national and international
standards and guidelines.
You can obtain more information about the safety inspection from your service
center. The service center will provide the necessary documents upon request.
Markings on the
device
Devices bearing the CE label satisfy the essential requirements of applicable dir-
ectives.
Devices bearing the EAC mark of conformity satisfy the requirements of the rel-
evant standards for Russia, Belarus, Kazakhstan, Armenia, and Kyrgyzstan.
Disposal
To comply with European directives and national law, waste electrical and elec-
tronic equipment must be collected separately and sent for environmentally-
friendly recycling. Used devices must be returned to a distributor or an approved
9
EN-US
