Fronius Selectiva 4.0 2040 Operating Instructions Manual Download | Manualshive

Page: 51 / 68

background image

USB mode

In USB mode, the display shows
whether a USB thumb drive is plugged
in.

The USB thumb drive must meet the
following specifications:

-

Formatting: FAT32

-

32 Gigabyte maximum

-

No multiple partitioning

The

I-SPoT-VIEWER

software (www.fronius.com/i-spot) supports the visualiza-

tion and evaluation of the data on the USB thumb drive.

Only plug in the USB thumb drive when no charging process is taking place or
the charging process has been interrupted.

If the charging process has only been interrupted and not completely ended, it is
only possible to read data and not to perform an update or load a configuration.

Navigating in USB mode

1

Press the "Pause/Start" button to change to the settings listed below.

2

Use the "Up/Down" buttons to scroll between the settings.

3

Press the "Pause/Start" button to confirm the desired setting.

To start a data download, confirm this again with the "Pause/Start" button. If this
repeated confirmation with the "Pause/Start" button is not carried out, the
download starts automatically after one minute.

While a charging process is in progress, the USB thumb drive may be connected
after pressing the "Pause/Start" button. It is only possible to read data and not to
perform an update or load a configuration.

Safely remove

-

Safely remove the USB thumb drive once the desired action is complete.

Update

-

A list of suitable update files stored on the USB thumb drive opens.

-

The desired file is selected and confirmed in the same way as scrolling
through the settings.

-

Do not rename the automatically assigned file name of the update file!

-

The latest firmware is available in the

download area

of the Fronius website.

-

Firmware installation instructions are included in the zip file of the down-
load.

Download

-

The data of the logged charging parameters stored in the data logger of the
device is saved for the I-SPoT VIEWER on the USB thumb drive.

-

Events as well as device settings and user curves (configuration) are also
saved.

-

The following time ranges can be selected for the data logger:
1 month
3 months
All
Since last time

51

EN-US

«
...
49
50
51
52
53
...
»

Summary of Contents for Selectiva 4.0 2040





































































Reviews:

No comments

Related manuals for Selectiva 4.0 2040

Brand: Panasonic Pages: 4

X POWER EXCHANGE PXBC-004

Brand: Ozito Pages: 2

Brand: Pitaka Pages: 21

Multi-Charger Pro

Brand: Magnadyne Pages: 2

Brand: Clarke Pages: 12

Brand: BASETech Pages: 8

ULTRA-100 Series

Brand: ProLite Pages: 6

Brand: Bretford Pages: 9

Brand: Inbay Pages: 8

Brand: Delta-q Pages: 12

Brand: Champion Pages: 2

Brand: CEMONT Pages: 60

Brand: Kobalt Pages: 28

RESU7H StorEdge

Brand: LG Chem Pages: 35

Brand: Humanscale Pages: 22

Brand: PulseTec Pages: 40

Brand: EINHELL Pages: 32

Brand: EINHELL Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands